Adhesion instructions

First clean the base thoroughly and get it grease free with window cleaner or methylated spirits, for example.

Fix the text, with the backing paper still in place, in the correct position with tiny strips of masking tape or sellotape.

Then stick a strip of masking tape or sellotape along the entire upper edge. This strip keeps the text in the correct position and will function as a hinge.

By making incisions between the letters, the adhesion process will be divided up into smaller pieces for longer texts.

Turn the text up over the hinge and partially remove the backing paper, or completely if its size permits this.

Firmly rub the text from top to bottom onto the base with a squeegee.

Give the layer of glue a few minutes to build up good adhesion. Afterwards carefully remove the application tape under a sharp corner.